All designs will download instantly after payment! Design files are downloaded as a zip file.
You will need to be able to open the zip file and extract the files you need for your embroidery machine.
You will also need the software/hardware to transfer the design to your embroidery machine in order to use this file.
The zip file will contain the following machine formats each insides its own folder-
Only 10 more days until Christmas!!!
The Tool Set2 Fill design is a lot of 6 different embroidery fill designs made for the 4x4 hoop. Each design comes in 3 different sizes! You receive a total of 18 designs.
Tape Measure - 2 inch, 3 inch and 4 inch
Screw Driver - 2 inch, 3 inch and 4 inch
Saw - 2 inch, 3 inch and 4 inch
Right Angle - 2 inch, 3 inch and 4 inch
Screw - 1 inch, 2 inch and 3 inch
Nut - 1 inch, 2 inch and 3 inch
You will also receive a stitchmap and jpg of each finished design.
For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.
Top Sellers for Christmas