Tool Set1

bug/

All designs will download instantly after payment! Design files are downloaded as a zip file. You will need to be able to open the zip file and extract the files you need for your embroidery machine. You will also need the software/hardware to transfer the design to your embroidery machine in order to use this file. The zip file will contain the following machine formats each insides its own folder-
DST
EXP
HUS
JEF
PES
VIP
VP3
SHV
XXX

The Tool Set1 Fill design is a lot of 6 different embroidery fill designs made for the 4x4 hoop. Each design comes in 3 different sizes! You receive a total of 18 designs.
Hammer - 2 inch, 3 inch and 4 inch
Drill - 2 inch, 3 inch and 4 inch
Channel Locks - 2 inch, 3 inch and 4 inch
C-Clamp - 2 inch, 3 inch and 4 inch
Wrench -- 2 inch, 3 inch and 4 inch
Nail - 1 inch, 2 inch and 3 inch
You will also receive a stitchmap and jpg of each finished design.

For a quality stitched design, I recommend using proper stabilizer and needle size for the project fabric along with quality thread. In particular, with fine gauge and knit fabric, such as T-shirts and baby onsies, I find it best to use a sticky back stabilizer on the fabric with a stitch and tear stabilizer on top of it inside the fabric AND a wash away stabilizer on the outside of the fabric, especially when stitching fonts or thin lines. A thinner gauge knit needle can prevent needle holes as well.

$2.15

Only 163 more days until Easter!!!

Top Sellers for Easter